Stealth Light Installation

1. Alcohol clean a spot above limb bolt (see pictures); allow to dry.

2. If a Trophy Ridge sight is on bow, the front of it may be used.  See pictures.

3. Remove paper backing from Stealth Light.

4. Press Stealth Light firmly onto alcohol cleaned area for about 20 seconds.

5. Run wires from Stealth Light to Power/Control Pack and plug them into P/C Pack.

6. Secure wires in appropriate locations with Zip ties &/or Velcro strap(s).

Back to Menu

LP Archery Products, LLC nor Pro-LIGHT DX Warranty covers a scope or sight that has been damaged by adding a tapped hole incorrectly.  Be sure that whomever adds tapped hole to scope or sight is qualified to do so correctly.